Current manufacturing opportunities

Position Overview

We are seeking an experienced Production Supervisor to lead clean room manufacturing operations in a highly regulated medical device environment. This role is responsible for supervising daily production activities, ensuring compliance with FDA regulations and ISO standards, and driving continuous improvement initiatives. The ideal candidate brings at least 5 years of experience in a regulated manufacturing environment and a demonstrated track record of leading high-performance production teams.

Key Responsibilities

• • Supervise and direct clean room production staff across assigned shifts, ensuring adherence to SOPs, GMP/GLP guidelines, and ISO 13485 quality standards.
• • Monitor production schedules and output targets; identify and resolve bottlenecks to maintain on-time delivery.
• • Enforce clean room protocols including gowning procedures, environmental monitoring, and contamination control measures.
• • Partner with Quality Assurance to investigate non-conformances, initiate CAPAs, and implement corrective measures.
• • Conduct daily shift meetings, performance reviews, and ongoing coaching to develop team members.
• • Maintain accurate production records, batch documentation, and deviation reports in compliance with FDA 21 CFR requirements.
• • Collaborate cross-functionally with Engineering, Supply Chain, and Regulatory Affairs to support new product introductions and process improvements.
• • Lead or participate in internal and external audits; serve as a point of contact for regulatory inspections.
• • Drive Lean/Six Sigma initiatives and participate in continuous improvement projects to reduce waste and improve yield.
• • Ensure all safety protocols are followed; promptly address and document any safety incidents or near-misses.

Qualifications Required

• • Minimum 3 years of production supervisory experience in a regulated manufacturing environment (medical device strongly preferred; pharmaceutical, aerospace, semiconductor, or other highly regulated industries considered).
• • Demonstrated knowledge of FDA 21 CFR Part 820 (Quality System Regulation) and ISO 13485.
• • Hands-on experience with clean room operations and gowning/environmental control requirements.
• • Strong understanding of GMP, SOPs, and documentation practices.
• • Proven ability to lead, motivate, and develop a production team.
• • Proficiency with ERP/MES systems and Microsoft Office Suite.
• • U.S. Citizenship or U.S. Permanent Resident status required.

Preferred

• • 5 years of supervisory experience in medical device or similarly regulated manufacturing.
• • Experience with ISO Class 7 or Class 8 clean rooms.
• • Lean Manufacturing or Six Sigma certification (Green Belt or higher).
• • Background in electromechanical or implantable device manufacturing.
• • Bachelor’s degree in Engineering, Manufacturing, Life Sciences, or related field.

Work Environment

This position operates primarily within an ISO-classified clean room environment. Candidates must be willing to adhere to all gowning and contamination control procedures.

Ability to stand for extended periods and lift up to 30 lbs may be required. Schedule may include rotating or off-shift hours depending on production needs.

Company Overview

Our client is a 100% employee-owned organization with a strong track record in custom unitized curtain wall systems. Their reputation is built on technical innovation, design excellence, and consistent quality.

Operating across the Midwest and East Coast, they offer real growth opportunities — and because every employee has an ownership stake through an ESOP, your success is tied directly to the company's. Full-time employees receive a competitive benefits package including medical, dental, vision, critical illness, and accident coverage.

Additional benefits include employer-paid life insurance, short- and long-term disability, an EAP, tuition reimbursement, and a 401(k) with a 4% company match. Flexible scheduling is available.

Job Summary Our client is looking for a Senior Estimator to take ownership of labor and material estimates for complex exterior facade and custom unitized curtain wall projects. You'll work closely with Sales, Project Management, Engineering, and Field Operations — and you'll be expected to bring both technical depth and leadership to the table, mentoring junior estimators as the department grows.

What You'll Do Scope & Analysis Take the lead on reviewing architectural and engineering documents to define full project scope. Flag and document any non-standard elements that require special attention or creative solutions.

Work cross-functionally to develop practical, cost-effective approaches. Ensure awarded contract scope stays true to what was originally proposed.

Estimating — Labor & Materials Own the full estimating process: review, validate, and sign off on labor estimates across shop, engineering, field, and PM functions. Oversee material takeoffs and specifications, including extrusions, dies, and finishes.

Evaluate vendor pricing and make recommendations; ensure junior estimators are getting multiple competitive quotes. Problem Solving & Vendor Relations Tackle complex project challenges in partnership with internal teams.

Build and maintain strong vendor relationships; step in to negotiate when scope, risk, or pricing needs resolution. Project Handoff & Communication Manage a clean handoff to internal teams on awarded projects, with clear documentation of all pre-sale commitments.

Keep stakeholders informed and decisions moving throughout the estimating lifecycle. Team Leadership Mentor and develop Estimator I and II staff.

Champion process improvements that increase accuracy and efficiency across the department. What You Bring 5+ years of estimating experience in glass and glazing.

Bachelor's degree in applied science or a related technical field preferred. Ability to read and interpret construction documents, specs, and project management materials.

Proven experience leading complex estimates and guiding junior team members. Working knowledge of engineering and architectural principles.

Strong written and verbal communication; organized, decisive, and detail-oriented. Proficiency in Microsoft Office Suite.

Ability to travel up to 10%.

Machining / CNC Technical Requirements

Ability to interpret technical drawings and dimensional specifications for precision-machined components Strong mechanical reasoning and hands-on problem-solving capability Proficiency using common shop tools, including manual finishing and material removal tools Solid applied mathematics skills, including fractional and decimal calculations and conversions Demonstrated CNC machining experience (typically 2 - 4 years or equivalent technical competency) Ability to independently perform milling machine setups with minimal supervision Ability to train and support peers on milling equipment Ability to successfully complete a mid-level milling competency assessment (written and practical) Ability to read, interpret, and understand CNC programs Proficiency using standard precision measurement tools Ability to perform tool touch-offs and adjust offsets on milling machines Ability to evaluate tool life and select appropriate tooling applications Ability to respond appropriately to unexpected machine stoppages Ability to identify unacceptable surface finishes and implement corrective actions Understanding of speeds and feeds adjustments Ability to perform basic machine and process troubleshooting Ability to set up and run parts efficiently while minimizing scrap Ability to operate multiple machines simultaneously Ability to maintain productivity levels consistent with team standards

General Qualifications

Ability to follow written and verbal instructions Ability to lift up to 40 pounds with adequate manual dexterity Experience using overhead lifting devices Ability to safely operate forklifts and other material-handling equipment

Machining / CNC Technical Requirements

Ability to interpret technical drawings and dimensional specifications for precision-machined components Strong mechanical reasoning and hands-on problem-solving capability Proficiency using common shop tools, including manual finishing and material removal tools Solid applied mathematics skills, including fractional and decimal calculations and conversions Demonstrated CNC machining experience (typically 2 - 4 years or equivalent technical competency) Ability to independently perform milling machine setups with minimal supervision Ability to train and support peers on milling equipment Ability to successfully complete a mid-level milling competency assessment (written and practical) Ability to read, interpret, and understand CNC programs Proficiency using standard precision measurement tools Ability to perform tool touch-offs and adjust offsets on milling machines Ability to evaluate tool life and select appropriate tooling applications Ability to respond appropriately to unexpected machine stoppages Ability to identify unacceptable surface finishes and implement corrective actions Understanding of speeds and feeds adjustments Ability to perform basic machine and process troubleshooting Ability to set up and run parts efficiently while minimizing scrap Ability to operate multiple machines simultaneously Ability to maintain productivity levels consistent with team standards

General Qualifications

Ability to follow written and verbal instructions Ability to lift up to 40 pounds with adequate manual dexterity Experience using overhead lifting devices Ability to safely operate forklifts and other material-handling equipment

Fit for Duty Requirements

• Ability to stand, sit, walk, reach, climb, balance, stoop, kneel, crouch, crawl, talk, hear, and use hands for handling and manipulation throughout the workday.
• Ability to lift up to 40 pounds with proper coordination and manual dexterity.
• Vision requirements include close, distance, color, peripheral vision, depth perception, and focus adjustment.
• Ability to work at heights exceeding 30 feet using appropriate fall protection.
• Ability to work in high-temperature environments (near ovens, furnaces, boilers, or ceiling areas) for extended periods.
• Ability to work in confined or restricted spaces in, above, or beneath equipment.
• Ability to wear arc-flash protection and general PPE including gloves, respiratory protection, aprons, safety glasses, steel-toed footwear, and weather-appropriate gear (provided).

General Responsibilities

• Utilize a computerized maintenance management or work order system to receive assignments, update progress, and document completed work.
• Conduct technical research and diagnostics to resolve equipment issues.
• Operate forklifts, manlifts, and material-handling equipment including cranes, hoists, and pallet jacks.
• Participate in ongoing technical training as required.
• Perform duties outside of machine repair as needed, including housekeeping, lean initiatives, fabrication, and support tasks.
• Demonstrate accountability, task ownership, and adherence to company policies and safety procedures.
• Participate in the company’s emergency response program, including CPR certification and annual training (provided).
• Perform outdoor work when required, including grounds maintenance and snow removal (cold-weather gear provided).
• Troubleshoot and repair HVAC systems.

Position Overview

We are seeking a skilled CNC Machinist to join our precision manufacturing team on 1st or 2nd shift. The ideal candidate will have hands-on experience programming, setting up, and operating CNC lathes — particularly Mazak equipment — and will play a key role in overseeing production operations while maintaining the highest standards of quality and efficiency.

Key Responsibilities

• • Program, set up, and operate Mazak CNC lathes to produce precision machined components
• • Oversee and coordinate all production activities to meet schedules and output targets
• • Mentor and assist fellow machinists with CNC programming and machine operation
• • Ensure all parts meet established quality standards through in-process and final inspection
• • Perform tolerance analysis and review engineering drawings, including GD&T specifications
• • Conduct part post-processing operations as required per job travelers and work orders
• • Monitor machine performance and make adjustments to maintain optimal efficiency
• • Document production data, nonconformances, and shift reports accurately
• • Identify opportunities for process improvement and communicate findings to supervision

Qualifications Required

• • 3+ years of experience in CNC machining, specifically CNC lathe operation
• • Demonstrated proficiency programming and operating Mazak CNC lathes
• • Solid understanding of GD&T (Geometric Dimensioning & Tolerancing)
• • Ability to read and interpret engineering drawings and blueprints
• • Experience with precision measurement tools and inspection equipment
• • Proven ability to hold tight tolerances in a production environment

Preferred

• • Experience in a supervisory or lead machinist capacity
• • Familiarity with ISO or AS9100 quality management systems
• • Knowledge of part post-processing methods (deburring, finishing, etc.)
• • Associate's degree or vocational certification in Machining Technology or related field

Position Overview

We are seeking a skilled CNC Machinist to join our precision manufacturing team on 1st or 2nd shift. The ideal candidate will have hands-on experience programming, setting up, and operating CNC lathes — particularly Mazak equipment — and will play a key role in overseeing production operations while maintaining the highest standards of quality and efficiency.

Key Responsibilities

• • Program, set up, and operate Mazak CNC lathes to produce precision machined components
• • Oversee and coordinate all 2nd shift production activities to meet schedules and output targets
• • Mentor and assist fellow machinists with CNC programming and machine operation
• • Ensure all parts meet established quality standards through in-process and final inspection
• • Perform tolerance analysis and review engineering drawings, including GD&T specifications
• • Conduct part post-processing operations as required per job travelers and work orders
• • Monitor machine performance and make adjustments to maintain optimal efficiency
• • Document production data, nonconformances, and shift reports accurately
• • Identify opportunities for process improvement and communicate findings to supervision

Qualifications Required

• • 3+ years of experience in CNC machining, specifically CNC lathe operation
• • Demonstrated proficiency programming and operating Mazak CNC lathes
• • Solid understanding of GD&T (Geometric Dimensioning & Tolerancing)
• • Ability to read and interpret engineering drawings and blueprints
• • Experience with precision measurement tools and inspection equipment
• • Proven ability to hold tight tolerances in a production environment

Preferred

• • Experience in a supervisory or lead machinist capacity
• • Familiarity with ISO or AS9100 quality management systems
• • Knowledge of part post-processing methods (deburring, finishing, etc.)
• • Associate's degree or vocational certification in Machining Technology or related field

Preferred (not required):

Technical degree or certification (Mechanical, Electrical, Industrial Maintenance, etc.) Experience in corrugated packaging, printing, converting, or manufacturing Experience with PLC troubleshooting

ESSENTIAL DUTIES AND RESPONSIBILITIES:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Other duties may be assigned.

• · Demonstrate safety as a core value and establish a safe work environment by leading by example.
• · Load and secure concrete products onto flatbed truck using a forklift or boom crane.
• · Unload products safely and securely at a customer’s site using boom crane or oversee and coordinate the safe unloading by customer.
• · Safely operate a vehicle between our facility and multiple customer destinations on a delivery route.
• · Abide by the companies safety regulations, including safety equipment where needed, performing safety checks, etc.
• · Communicate with dispatch regarding any necessary adjustments to delivery route or schedule to meet customer needs and maintain safe operations.
• · Maintain any logs that may be required by Federal and State regulations and/or company policy.
• · Perform inspection of vehicles and cranes to ensure safe operation and sufficient fuel levels for continued vehicle use.
• · Ensure all maintenance requests are submitted to the maintenance manager for timely repair and lower down time. Assist with vehicle maintenance as coordinated with the Maintenance Manager.
• · Other tasks as instructed by the Lead Delivery Driver or Sr. Dispatch Manager. These tasks may be unrelated to the Lead Driver’s other responsibilities listed here, but the Lead Driver must keep in mind that our company is a small business where employees must wear multiple hats.

EXPECTED QUALIFICATIONS:

To perform this job successfully, an individual must have or be working towards the following qualifications:

• · Commercial Drivers license with a clean driving record.
• · Strong knowledge of safety procedures and regulations.
• · Excellent communication and interpersonal skills.
• · Ability to handle emergency situations calmly and efficiently.
• · Flexibility with working hours.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

To perform this job successfully, an individual must perform each essential duty satisfactorily. The requirements listed represent the required knowledge, skill, and/or ability. Other duties may be assigned.

• · Operate Mixer Truck – Loan and mix concrete at the batch plant, then pour into precast forms in the shops.
• · Clean and Maintain Mixer Trucks- (This is a crucial duty of this role.) The Mixer Driver will be expected to clean the trucks and maintain their cleanliness. Assist with maintenance of the mixer trucks as coordinated with the maintenance manager.
• · Batch Plant Operations – Assist with daily batch plant operations. This includes loading hoppers, batching concrete, and other tasks as needed.
• · Lead Batch Plant Cleaning and Maintenance – (This is a crucial duty of this role.) Lead daily, weekly, monthly, and as-needed cleaning and maintenance tasks. Help determine what tasks are required and ensure such tasks are performed. Constantly work towards the goal of having a clean, well-organized plant with minimal downtime.
• · Special Batch Plant Projects – Assist with special batch plant projects such as making modifications or additions, as needed.
• · Quality Control – Assist with quality control as directed by the Quality Control Manager. This may include tasks related to concrete testing, aggregate testing, documentation, organization, and/or other areas.
• · As instructed by managers. These tasks may be unrelated to the Mixer Driver’s other responsibilities listed here.

SPECIAL CONSIDERATIONS:

The following are special considerations related to the Shop Lead role:

• · Equipment Selection: Determining the tools and equipment needed to do a job.
• · Active Listening: Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Comprehends and listens efficiently.
• · Instructing: Teaching others how to do something.
• · Team Player: Get along well with others.

EXPECTED QUALIFICATIONS:

To perform this job successfully, an individual must have or be working towards the following qualifications:

• · Strong knowledge of safety procedures and regulations.
• · Excellent communication skills.
• · Flexibility with working hours.
• · Ability to handle emergency situations calmly and efficiently.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

To perform this job successfully, an individual must perform each essential duty satisfactorily. The requirements listed represent the required knowledge, skill, and/or ability. Other duties may be assigned.

• · Prepare job site layout using a total station instrument. Use drawing provided by CAD designer to lay out the foundation footprint and ensure proper placement of walls.
• · Coordinate with crew foreman to ensure proper preparation on-site for all structures being delivered.
• · Ensure scheduled preventative maintenance of trucks and installation equipment is requested or reported promptly that does not meet the OEM and state-mandated schedules.
• · Continually improve your understanding of local construction specifications and requirements. Complete all required SWA, OSHA, and other training.
• · Be Safety-oriented and know copmany safety requirements. Enforce subordinate compliance with all company safety policies.
• · Ensure proper installation of concrete walls per SWA specifications, SWA training, and SWA installation manual.
• · Maintain high customer satisfaction by assuming all facets of the installation with customer satisfaction as a priority.
• · Other tasks as instructed by management. These tasks may be unrelated to the Installation Crew Foreman responsibilities listed here

SPECIAL CONSIDERATIONS:

The following are special considerations related to the Project Manager role:

• · Effective communication is the most important aspect of this position.
• · Team Player: Get along well with others. Everything we do is a team effort.
• · Installation Technician will be expected to travel to job sites in the installation area.

EXPECTED QUALIFICATIONS:

To perform this job successfully, an individual must have or be working towards the following qualifications:

• · Experience in layouts for flatwork and/or framing, experience in pour in place concrete foundations is a plus.
• · Good verbal and written communication skills for dealing with customers and KOI team members across all functions.
• · Knowledge of terminology is customarily used in construction.
• · Ability to read and understand build sheets designed by CAD.
• · Strong knowledge of safety procedures and regulations.
• · Flexibility with working hours.
• · Ability to handle emergencies calmly and efficiently.

Key Responsibilities include, but are not limited to:

• Applications Engineering & Quoting – Analyze customer prints and specifications to develop complete machining strategies, including process flow, tooling approach, cycle-time assumptions, and labor inputs for accurate quoting.
• Process Design & Optimization – Develop, validate, and refine CNC turning processes focused on repeatability, efficiency, and manufacturability rather than daily machine operation.
• Programming Strategy & Review – Create, review, and optimize CNC programs with an emphasis on process robustness, tool life, and throughput; support programming standards and best practices.
• Manufacturing Support & Troubleshooting – Provide advanced technical support for complex setup, programming, or process issues; act as escalation point rather than primary operator.
• Continuous Improvement – Identify opportunities to reduce cycle time, tooling cost, and secondary operations through improved process design and technology application.
• Tooling & Workholding Strategy – Define tooling, collet, and workholding solutions that support efficient, scalable production.
• Quality & Compliance Collaboration – Work with Quality teams to establish inspection strategies and process controls that ensure consistent compliance with tight tolerance requirements.
• Cross-Functional Engagement – Actively participate in discussions across engineering, operations, quality, and commercial teams to support manufacturability and customer success.

Work Environment –

Fully onsite role with strong interaction across departments.

Qualifications:

Associate degree or equivalent technical education in Manufacturing Engineering, CNC Programming, or a related field 7+ years of experience supporting CNC turning processes in a precision manufacturing environment, with a strong applications or process-engineering focus Demonstrated ability to translate customer requirements into complete machining strategies rather than solely executing production work Advanced knowledge of CNC programming principles (G-code) and CAM systems, with an emphasis on optimization and standardization Strong understanding of CNC machine controls, servo systems, and mechanical fundamentals Experience supporting Swiss-style or comparable high-precision turning platforms High level of mathematical and analytical aptitude Comfortable supporting shop-floor teams through technical guidance and problem resolution as needed Must meet applicable employment eligibility and background requirements

Key Responsibilities

Program and lead setups on multi-axis Swiss turning centers Interpret complex blueprints and technical drawings Optimize tooling and cutting paths for performance and quality Troubleshoot machining and programming issues Oversee quality checks to ensure specifications are met Support continuous improvement initiatives Maintain a clean and safe work environment Train and mentor operators and machinists

Qualifications

5+ years of Swiss CNC programming experience Strong blueprint reading and advanced math skills Deep knowledge of metals and machining processes Proven troubleshooting and leadership ability Reliable, detail-oriented, and self-motivated Overtime/weekend availability as needed

Schedule:

Monday–Friday, 7:00 AM – 3:30 PM

Pay Range:

$27 – $43hr

Essential Duties and Responsibilities

• Follow established laboratory safety and operational procedures.
• Schedule outside contractors to perform calibrations.
• Conduct or organize calibration activities for mechanical, electrical, and linear equipment according to established procedures to maintain calibration status.
• Schedule and coordinate calibrations among various departments.
• Enter data into calibration management system.
• Perform repair and preventive maintenance on gages/equipment as needed.
• Prepare calibration reports and certificates.
• Track and maintain all equipment status.
• Initiate NCR for all out-of-tolerance equipment as required.
• Manage lost equipment status and calibration interval adjustments within calibration management system.
• Ensure all calibration is in accordance with approved procedures.
• Document all activities in a legible manner following established formats and procedures.
• Represent the calibration function during regulatory inspections.
• Education and Experience High school diploma or GED required 5 years of experience in a manufacturing setting required 2 years of experience with calibration of inspection equipment/hand gages required 2 years of experience with Geometric Dimensioning and Tolerancing (GD&T) required Knowledge and Skills Good mechanical aptitude; ability to read blueprints Good understanding of calibration principles preferred PMEL or equivalent training preferred Experience with SAP or equivalent calibration management software preferred Experience with laser micrometers and quality control inspection equipment preferred Calibration types include: physical/dimensional, temperature, pressure, torque, and electrical Additional Notes Clean room experience is not required Backgrounds in aerospace, pharma, automotive, or medical device manufacturing are all relevant

Preferred:

• Experience at a major orthopedic company with a robotics or AR surgical platform Familiarity with total joint arthroplasty (hip, knee, shoulder) applications Track record of leading teams through platform builds or technology integrations Why This Role Join the fastest-growing company in orthopedics at a pivotal moment in their enabling technology strategy Lead a portfolio that is actively being invested in — budget, headcount, and executive attention are all aligned Significant runway to grow the team and expand the platform Competitive total compensation including base salary, 30% annual bonus target, and relocation assistance available To be considered, candidates must have enabling technology experience.
• Traditional implant-only backgrounds will not be evaluated for this position.

Key Responsibilities

• Lead sourcing initiatives for precision components, raw materials, and finished assemblies within a regulated manufacturing environment.
• Develop and execute category strategies aligned with business growth, quality, and cost objectives.
• Manage supplier selection, qualification, and performance monitoring, ensuring compliance with applicable regulatory standards.
• Partner cross-functionally with Engineering, Quality, and Operations to align supplier capabilities with product development and production requirements.
• Negotiate pricing, contracts, and supply agreements to achieve year-over-year cost improvements.
• Identify and mitigate supply chain risks through alternate sourcing strategies and capacity planning.
• Drive continuous supplier performance improvement in quality, delivery, and cost.
• Leverage data analytics to monitor spend, forecast demand, and inform strategic decisions.
• Monitor industry trends and emerging manufacturing technologies relevant to precision-engineered products.

Essential Qualifications

• Bachelor’s degree in Supply Chain, Engineering, Business, or related field (advanced degree preferred).
• Minimum 5 years of sourcing or supply chain experience in a regulated manufacturing environment.
• Strong understanding of precision manufacturing processes such as casting, forging, machining, coatings, and assembly.
• Experience working under cGMP and ISO-regulated systems.
• Demonstrated negotiation and contract management experience.
• Strong analytical, project management, and problem-solving skills.
• Excellent communication and stakeholder management abilities.